I have shifted my wordpress blog to a hosted space. I would not be posting any further updates on this blog. Please update your bookmarks to point to my new blog at http://techlog.mehulved.com .
If you want to check my non-tech blog, you can view it on http://blog.mehulved.com
Heh! Please don’t mistake me for one of those LHC guys. No, I am not talking about planets as in heavenly bodies which reflect lights from the stars but have give out no light on their own. I am talking about planet as in a feed aggregator.
So, let’s get started up.
Then untar the file if you downloaded the tarball.
tar -xpvf planet-xx.tar.bz2
Now untar the planet tarball and install the planet files eg.
tar -xpvf ~/planet-2.0.tar.bz2
Now we need to configure the config.ini file in fancy directory to get started quickly. If you wanto take your time
Look at the file, it’s nicely commented you should have no problem at all in configuring it to your tastes, believe me. It’s too easy.
I set my output directory as
output_dir = /var/www/localhost/htdocs/planet
cp -R examples/output/* /var/www/localhost/htdocs/planet
This will place all the output files in the planet and the second command will copy the images folder and css file to the DocumentRoot so your page renders well.
Now to generate the output
Now you can install the planey.py and planet-cache.py to /usr/bin using setup.py so that you can run it via cron
./setup.py config && ./setup.py install
0 * * * * /usr/bin/planet.py /home/user/planet-2.0/examples/fancy/config.ini
Now open up your web browser and point to localhost/planet. Of course you need a web server running on localhost to try this out.
To show your image, put it in /var/www/localhost/htdocs/planet/images
Happy journey. Enjoy the feeds on your own planet!
No how-to from my side this time around. But a nice link I followed to setup tor and privoxy on my machine. It’s really easy to follow and straightforward.
Probably I will write a how-to on customising privoxy to block ads, unwanted url’s, redirect machines on the network to use tor and privoxy using firewall rules.
Today on ##linux-india at irc.freenode.net people were discussing about DNS and the recent DNS security issue and it’s implications and solutions. So, I decided to try out the test for my ISP’s nameservers, the default nameservers that I use. The test can be found on Kaminsky’s Website.
The test confirmed that my ISP’s nameservers aren’t patched, so I decided to finally configure my dnsmasq finally and again use local DNS servers. But, the dnsmasq configuration is too lengthy and complicated for this purpose. It’s a great software if you want to have a lot of function like tftp boot, dhcp and such. But, in my case I just need a caching DNS server so decided it was either bind which I always use or try maradns, as suggested by someone on the channel.
Since, I have gone with bind in the past I decided to go with maradns, which I heard is easy to configure and is supposedly as secure as djbdns. So maradns it was. I downloaded the latest release from their download page as no binaries are available in arch repos.
So, let’s start with the process, now that you’ve downloaded the binary. This will work, only for linux. Please check the README files and documentation for further details and different platforms.
First untar the downloaded file, in my case the tar.bz2 file
tar xjvf maradns-1.3.07.08.tar.bz2
Now, your binaries have been created and you’re ready to test out the DNS server
Note:-You need to be root henceforth
mv server/maradns /usr/local/sbin
mv tools/duende /usr/local/sbin
Now open the /etc/mararc file in your favourite text editor and add the following
ipv4_bind_addresses = “127.0.0.1”
chroot_dir = “/etc/maradns”
recursive_acl = “127.0.0.1”
Now start maradns
Then test it
dig @127.0.0.1 example.com
If it returns a reply, you’re good to go 🙂 If not, post the errors I will be glad to help out.
Now, try running it in daemon mode
If all is fine till here then we can proceed to actually install maradns.
First cd to the maradns directory, where the source is place then run
Now, we need to add /usr/local/sbin and /usr/local/bin to our PATH variable
add the following to your bashrc
That’s it, you’re done! Your server is ready to run.
TODO :- Find init scripts for starting it at boot time. My distro is arch. If anyone can supply me one I will be thankful.
If you want the server to listen to multiple IP’s add them in a comma separated list inside the quotes for ipv4_bind_addresses. Check http://www.maradns.org/tutorial/recursive.html
Lots of nice stuff can be found at http://www.maradns.org/tutorial/tutorial.html
I was sitting at night browsing some friend’s blogs and adding RSS feeds to Akregator, after my new found fondness for KDE 4(more on that in a later post). Then Gaurish Sharma asked how to get webcam and fingerprint scanner to work on linux. I didn’t really have much clue but asked him to dig around with /var/log/dmesg and /var/log/messages to get more info on the webcam to start with. While he was looking around, I decided to dig up my own webcam from the closet.
I connected the webcam to the PC just to see a bunch of errors being spewed out by /var/log/messages. Then I installed gspcav1 kernel module and loaded it
pacman -S gspcav1
Still, no go. I still got errors on reconnecting the webcam. Then, I peeked around the Arch Linux wiki and found some other drivers that may be needed by device. Then ran
It showed up a microdia webcam but still /var/log/messages spewed out errors. Then I went for verbose option of lsusb to see if there’s anything worthwhile.
Here’s the lsusb -v output for those interested
Still nothing. 😦
Then I decided to remove bluetooth from the other port and insert the webcam there. And voila! there it works. The webcam was detected, no errors this time and the required device was created.
Now, to test if it works or not. I tried kopete but alas! it doesn’t support all the webcams and mine is in one of those unsupported ones. I started looking at other apps which support more webcams. I started with cheese and ekiga but both looked to install evolution-data-server, why would I want that? Then I installed skype
pacman -S skype
Then add the user to video group and execute
chown :video /dev/video0
Now, logout and log back in for group settings to take effect. Then I ran skype.
Hurray! My webcam worked! Though the picture was hardly visible, I would place the blame on the webcam rather since it hasn’t been used in years now and it has always been throwing out grainy pictures since the beginning.
What is qingy?
Here’s the quote from qingy developers Quote:
qingy is a replacement for getty. Written in C, it uses DirectFB to provide a fast, nice GUI without the overhead of the X Windows System. It allows the user to log in and start the session of his choice (text console, gnome, kde, wmaker, …).
Source :- http://qingy.sourceforge.net
- It works
- It remembers last user who logged in, with focus on password
- It also rememebers last session each user chose
- Alternatively it remembers last session on a per-tty basis
- Fully themable
- A theme will look the same on all machines, independently of the resolution
- You can select your favourite theme, or a random one every time
- Both text and X sessions are supported
- You can start more that one X session at once
- You can even start X inside a console when X sessions are already running
- PAM support
- Support for screen savers
- Auto log-in support
- Session locking support
- Session timeout, with lock or logout as available actions
- tty specific options support
- Customizable key bindings
- Text mode support
I came across qingy while browsing gentoo-wiki
Here is the gentoo-wiki qingy guide
I had almost given up blogging but came across this nice incident so had to post it.
This is a true incident that happened with my friend rahul, who’s been looking to try linux but he’s a dumbhead when it comes to technology.
This dude, Utsav came on digit forum and announced that he was selling linux 10 cd’s for Rs. 1500 each. But that thread was locked by the Admin before he could get to talk with the fellow
So, next day he decided to add this fellow to my yahoo list and have a good deal with him there.
What follows hereon is the log of what transpired in the deal between them
(23:41:36) utsav: hey
(23:41:39) : Buzz!!
(23:41:46) utsav: want 2 talk or not?
(23:42:09) utsav: r u there?
(23:42:19) rahul: sorry i was away
(23:42:31) utsav: ok
(23:42:43) rahul: which linux have you got?
(23:43:08) utsav: UBunt version 6.1 Continue reading